Visit IDES.com
Friday, October 31, 2014
Composite CF2518/MTM49-3 Plain Weave Prepreg (Fv=55%)
Unit System:  
Advanced Composites Group Inc. - Carbon/Epoxy
ActionLegend (Open)
Send this page Print this Page View PDF Datasheet  
Limited Datasheet

Please Note: This symbol denotes data that is available when you purchase this datasheet or subscribe to Prospector:Composites. To order, call 307-460-4763 x1.

General Information
Product Description
CF2518/MTM49-3 fabric is a carbon/epoxy composite which features a high glass transition temperature and moderatre toughness. This composite also has good tack/drape and impact resistance.
General  
Generic Name 
  • Carbon/Epoxy
Fiber 
  • CF2518
Matrix 
  • MTM49-3
  • Advanced Composites Group Inc.
  • 55 %
  • Plain Weave Prepreg 1
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Cure Cycle 
  • Cured at 275°F and postcured for 2 hours at 392°F.
Data Source 
  •  2
Technical Properties 3
Mechanical
Nominal Value
Unit
Test Method
     
Sxz, 75.2°F
ksi
 
Sxz, 176°F 4
ksi
 
Sxz, 176°F 5
ksi
 
Sxz, 212°F 4
ksi
 
Sxz, 212°F 5
ksi
 
Sxz, 248°F 4
ksi
 
Sxz, 248°F 5
ksi
 
     
Laminate - Interlaminar, 75.2°F
msi
 
Laminate - Interlaminar, 176°F 5
msi
 
Laminate - Interlaminar, 212°F 5
msi
 
Laminate - Interlaminar, 248°F 5
msi
 
     
Laminate - Interlaminar, 75.2°F
ksi
 
Laminate - Interlaminar, 176°F 5
ksi
 
Laminate - Interlaminar, 212°F 5
ksi
 
Laminate - Interlaminar, 248°F 5
ksi
 
Thermal
Nominal Value
Unit
Test Method
    DMA
Wet
°F
 
Dry
°F
 
Additional Information
All data was normalized to a fiber volume of 55%.
Tests were conducted at dry moisture conditions unless noted otherwise.
All mechanical data was obtained from 0/90° laminates.
Notes
1Manufacturer has specified woven/fabric; this is assumed to be a plain weave.
2
3Properties are not to be construed as design specifications.
4Conditioned for 14 days in 158°F water.
5Conditioned in boiling water for 24 hours.
 
UL IDES

Copyright ©   IDES Inc. (www.ides.com), and Firehole Technologies Inc. (www.fireholetech.com)

Information for this material was last updated: 12/12/2013

The information presented on this datasheet was acquired by Firehole Technologies Inc., www.fireholetech.com, from various sources. IDES and Firehole make substantial efforts to assure the accuracy of this data. However, IDES and Firehole assume no responsibility for the data values and strongly encourages that upon final material selection, data points are validated.